If you have a desktop laser cutter, it is essential to keep it in good working order.  Here are a few tips to help you.

Before turning on the unit, make sure the laser tubing is full of circulating vapour. The laser tube is directly influenced by flowing water, so replace the water tank and clean it daily.

Long-term use of the machine’s fan accumulates a lot of dust, causing a lot of noise and making it difficult to vent and deodorize.

Guide rail cleaning: During the cutting processing, the cutter will produce corrosive dust and smoke. Ensure that the guide rails are cleaned every six months.

For a long time, this smoke and dust will be collected on the surface of the guide rail and longitudinal axis, affecting the equipment’s processing accuracy.

The machine’s optical path is accomplished by the reflection of the lens and the focusing of the focusing mirror. Check the path regularly.